Product ID:TURBO OIL 25
MSDS Date:11/13/1992
FSC:9150
NIIN:01-210-1938
MSDS Number: BPCDG

Emergency Phone: 713-656-3424/800-424-9300(CHEMTREC)

Info Phone: 713-656-3424/3540

Cage: 29700

Telephone: 713-656-5949 / 713-656-3424

Cage: 29700

BASE LUBRICANT OF POLYOL ESTERS AND PROPRIETARY ADDITIVES.

Fraction By Weight: <100%

PROPRIETARY ADDITIVES

LD50 LC50 Mixture:ORAL RAT LD50 IS >5 GM/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT
WITH THIS PRODUCT MAY CAUSE SKIN IRRITATION. PRODUCT HAS LOW ORDER
ORAL AND DERMAL TOXICITY, HOWEVER MINUTE AMOUNTS ASPIRATED INTO
LUNGS DURING INGESTION OR VOMITING MAY CAUSE MAIL TO SEVERE
PULMONARY INJURY OR POSSIBLY DEATH.
Explanation of Carcinogenicity:CONTINUOUS CONTACT WITH MOTOR OIL HAS
CAUSED SKIN CANCER IN ANIMAL TESTS.
Effects of Overexposure:PROLONGED SKIN CONTACT MAY CAUSE SKIN
IRRITATION. CONTACT WITH EYES MAY CAUSE EYE IRRITATION.
Medical Cond Aggravated by Exposure:NONE RECOGNIZED

First Aid:EYES:FLUSH WITH CLEAR WATER FOR 15 MIN. OR UNTIL IRRITATION
SUBSIDES. SKIN:REMOVE ANY CONTAMINATED CLOTHING AND WASH SKIN
THOROUGHLY WITH WATER AND SOAP. INHALATION:IMMEDIATELY REMOVE FROM
EXPOSURE AR EA AND CALL A PHYSICIAN. IF BREATHING IS IRREGULAR OR
HAS STOPPED, START RESUSCITATION. ADMINISTER OXYGEN. INGESTION:DO
NOT INDUCE VOMITING. CALL A PHYSICIAN IMMEDIATELY.

Flash Point Method:COC
Flash Point:475F,246C
Autoignition Temp:Autoignition Temp Text:775F
Lower Limits:1
Upper Limits:12
Extinguishing Media:FOAM, WATER SPRAY (FOG), DRY CHEMICAL, CARBON
DIOXIDE AND VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:USE WATER SPRAY, DRY CHEMICAL, FOAM OR CARBON
DIOXIDE TO EXTINGUISH THE FIRE. USE WATER TO KEEP FIRE-EXPOSED
CONTAINERS COOL. USE SCBA FOR ENCLOSED PLACES.
Unusual Fire/Explosion Hazard:IF A LEAK HAS NOT IGNITED, USE WATER
SPRAY TO DISPERSE THE VAPORS AND TO PROVIDE PROTECTION FOR MEN
ATTEMPTING TO STOP A LEAK. MINIMIZE BREATHING THE VAPORS.

Spill Release Procedures:RECOVER FREE PRODUCT. ADD SAND, EARTH, OR
OTHER SUITABLE ABSORBENT TO SPILL AREA. MINIMIZE BREATHING VAPORS
AND SKIN CONTACT. KEEP PRODUCT OUT OF SEWERS AND WATERCOURSES BY
DIKING OR IMPOUNDING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE. DO NOT STORE NEAR HEAT, SPARKS, FLAME OR STRONG OXIDANTS.
Other Precautions:INFORMATION ON ELECTRICAL EQUIPMENT APPROPRIATE FOR
USE WITH THIS PRODUCT MAY BE FOUND IN THE LATEST EDITION OF THE
NATIONAL ELECTRICAL CODE (NFPA-70), AVAILABLE FROM THE NATIONAL
FIRE PROTECTION ASSO CIATION, MASSACHUSETTS 02269.

Respiratory Protection:USE SUPPLIED-AIR RESPIRATORY PROTECTION IN
CONFINED AREAS, IF NEEDED.
Ventilation:USE LOCAL EXHAUST TO CAPTURE VAPOR, MISTS OR FUMES, IF
NECESSARY. SUFFICIENT VENTILATION TO PREVENT OVER EXPOSURE.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:SPLASH GOGGLES OR FACE SHIELD.
Other Protective Equipment:CHEMICAL-RESISTANT APRON OR OTHER IMPERVOUS
CLOTHING.
Work Hygienic Practices:MINIMIZE BREATHING VAPOR, MISTS OR FUMES. AVOID
PROLONGED OR REPEATED CONTACT WITH SKIN.
Supplemental Safety and Health
REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE REUSE. CLEANSE SKIN
THOROUGHLY AFTER CONTACT, BEFORE BREAKS AND MEALS AND AT THE END OF
A WORK PERIOD. 'EMPTY' CONTAINERS MAY CONTAIN RESIDUE OR VAPOR.
TREAT THEM WITH THE RESPECT DUE FULL ONES. DO NOT CUT,WELD,ETC. ON
THEM.

HCC:V6
Boiling Pt:B.P. Text:752F,400C
Vapor Pres:<0.01
Vapor Density:>5
Spec Gravity:0.99
pH:NEUTRL
Evaporation Rate & Reference:<0.001(N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID, AMBER COLOR. MILD FATTY ODOR.
Percent Volatiles by Volume:NONE

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, PILOT LIGHTS, STATIC
ELECTRICITY, OPEN FLAMES
Hazardous Decomposition Products:FUMES, SMOKE, CARBON MONOXIDE, SULFUR
OXIDES, ALDEHYDES, AND OTHER DECOMPOSITION PRODUCTS (INCOMPLETE
COMBUSTION)
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE GOVERNMENTAL
REGULATIONS. ADVISE AUTHORITIES IF SPILL HAS ENTERED OR MAY ENTER
SEWERS, WATERCOURSES, OR EXTENSIVE LAND AREAS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.